Installing the sensors

  • S0 sensor
Mounting the kWh meter in the meter cabinet must be done with care. If the meter is used for solar production, the in- and output must be swapped. Otherwise the meter would run in reverse, but this is blocked by the meter so it would stay at 0.
SchemaS0.jpg
  • Blinking led on existing meter
It is also possible to use an existing meter without S0 pulse but with a blinking LED and mount a phototransistor to the LED.
schemakwhled.jpg

Last edited Nov 12, 2012 at 10:07 PM by Harold65, version 5